Some people feel that removing tint from a car window is a tough job, however, with some tools and a little hard work, you can do it on your own. If your car window characterized with a tint is bubbling, or peeling, or you just want to take it off, then this guide will take you through every step. Let’s now get down to how one goes about removing tint from the car window.

Why Remove Window Tint?

Bubbling and Peeling

As time goes by, window tint can begin to peel or even develop blisters. This not only makes the car unfamiliar to the owner but also prevents proper visibility from inside the car. Such cosmetic enhancements can be achieved by first removing the old film and then installing the new one.

Legal Reasons

In certain parts of the country, there are limits as to how dark tints can be applied to car windows. It is a pain to have to go to court because of getting caught for wearing a bad window tint, which in most cases is excessive. In this case, taking off the tint is saving your skin.

Aesthetic Preferences

Perhaps you organisms purchased a pre owned that had dark tint or you just not in the mood for any tacky accessories. Removing the old shade makes it easier to replace with more appropriate tint.

Tools You’ll Need

Before you start to remove tint from car window, gather the following tools.

• Heat gun or hairdryer
• A razor blade or utility knife
• Cleaner containing ammonia
• Spray bottle
• Plastic garbage bags
• Paper towels or microfiber
• Cleaning solution for glass

Step-by-Step Guide

Step 1: Prepare Your Workspace

It is ideal to work under a well-ventilated environment. If you are doing the job outside, pick a warm and sunny day. The warmth will help dissolve the adhesive making it easier to remove the films.

Step 2: Heat the Tint

The next step is to use a heat gun or hairdryer to warm up the tint. Move the heat source back and forth about a few inches from the window. The technique’s purpose is to heat the adhesive but not the glass.

Step 3: Start Peeling

After warming the tint in steps gal with a scrapper strip the film starting on any of the corners. Take caution not to scratch the glass. Gradually remove the tint in the direction it is adhered to the window. Should it begin to snap, more heat is needed.

Step 4. Ammonia method of cleaning windows Soak towel

Fill a spray bottle with ammonia cleaner and let the fun begin. Pour some cleaner on the bonding glue that is sticking onto the window, then spray some more. Seal the window with a plastic garbage bag tto avoid their evaporation. Let sit for about thirty minutes.

Step 5. Removing the glazing or the adhesive

After the guess has waited for businessman afford, appetizer, razor blade is used for stratification of glue. For safety sake, go at the edges of the glass so that you avoid damaging the surface. Rub down the adhesive left with paper towels or microfiber sweeps.

Your window is perfect, now No adhesive is left on the glass. Now make sure you clean the glass surface with a little bit of a glass cleaner.

Tips and Tricks

Use the Sun

A heat gun does the job and so does the hair dryer, but no I did not use them. For this matter stick the ammonia and plastic bag over the window. Then park your car under the blazing sun for about 2 hours or so.

Exercise Patience

Taking off window tint can be a dull and at some points a torturous job, primarily when the tint is a bit vintage or has been on the car for a long period of time. You should be careful not to hurry so that you don’t put cracks in the glass.

Think About Allowing Professionals To Do It

For those who are not confident in their ability to remove the tint on their own, or if it is a particularly aggressive tint that is hard to take off, you may want to get someone else to do it. They have the time and knowledge to ensure that the window tinting would be removed without causing any damage.

Conclusion

It is possible for you to undertake the removal of window tint on your car and make it a success, as long as you have the basic tools and a lot of time and patience. So, whether you are battling bubbling and peeling, legal issues or just a change of scenery, proceed to these steps and complete the task at hand. Go slow and make sure you do not break your windows. If all else fails, do not be afraid to go to the professionals. Go forth and tint-remove!