Taking care of your car’s engine is the best way to ensure it will last for many years to come, but in order to do that, you have to regularly maintain your vehicle from the inside out.

Check out the tips below if you’re stumped as to how you should be taking care of your car’s engine and keeping it in tiptop condition.

Stay on Top of Oil Changes

One of the easiest ways to keep your engine running like new is by simply giving it an oil change on a regular basis. It also really helps if you use the best motor oil that you can afford, as this will ensure you’re really helping to keep your engine’s parts lubricated to prevent overheating.

If you let too much time pass between changes, you could actually cause permanent damage to the engine, so check what the car’s manufacturer suggests and schedule an oil change whenever necessary.

Let the Car Warm Up

When you start your car, you should not immediately put it into gear and drive off. This is because your engine will be cold, especially in the winter, and the oil will have settled into the oil pan, so it won’t be on the moving parts yet.

It normally takes just a few seconds to get the oil adequately pumping and lubricating the engine once you start the car, but you should keep the RPM down as you allow your car to warm up. Wait a minimum of 30 seconds prior to putting the car in gear to drive, and give it longer than that if the car has been off for longer than 24 hours.

Change the Air Filter Regularly

In addition to changing the oil regularly, you also should change the air filter regularly to keep your engine running well. Basically, your car’s air filter will keep all of the leaves, dirt, bugs, etc. from outside of the vehicle from getting into the engine.

This filter will inevitably become clogged over time, so you need to replace it depending upon the typical road conditions you encounter, as well as your driving habits. Though an air filter could typically last quite a long time, don’t let it get dirty or it won’t work efficiently.

Make Sure There’s Always Enough Coolant

The coolant will help keep the engine from overheating, so it’s yet another area of your engine that you need to maintain. Put simply, your vehicle’s coolant will move throughout the engine when its thermostat registers that the engine is getting too hot.

Making sure there is enough coolant in your engine at all times is as easy as regularly popping open the hood and looking at the coolant tank, which is clear. There should be orange or green liquid inside, and it should be in between the maximum and minimum marks on the tank.

These are just a few of the many ways that you can maintain your car’s engine and keep it running like new. Remember to check your owner’s manual for details on what it needs to operate smoothly.

There is a new transportation sensation, which is simply sweeping the world. The concept of ridesharing has gained rapid popularity in different parts of the globe because it holds a great deal of appeal to both drivers and passengers. It is basically the technological version of the traditional cabs and services like Uber and Lyft has spread far and wide. In simple terms, ridesharing is the transportation of various passengers traveling to the same place in one vehicle. Basically, drivers have to sign up for one of the ridesharing firms like Uber, which will charge a fee for connecting passengers to drivers via a smartphone app. Passengers use the app for arranging rides and pay via credit card.

There are numerous ways how the ridesharing concept has benefitted regular people. Moreover, not only is ridesharing helpful for drivers and passengers but can also have positive impacts on the environment. With promotion options like Lyft account credit, passengers can save money too. How? Read on to know more.

Ridesharing saves you money

Simply put, you are carpooling and this helps you in saving money and driving less. These savings mostly arise from reduced maintenance costs like the less frequent air filter or oil changes and savings on gas. In fact, some auto insurance companies may also offer discounted rates. When people ride together in one vehicle, they can split the cost and their share is only a fraction of what they would have otherwise spent when traveling via their own vehicle.

Ridesharing lets you meet other people

The beauty of ridesharing is that you get the opportunity of meeting people you wouldn’t have met otherwise. Since it is a carpool, a number of people can join you during your ride and this could actually help you in networking and building contacts. After all, you never know when you might need someone.

Ridesharing saves your energy

Another benefit of ridesharing is that you don’t have to drive your car anymore. You can just catch a ride to wherever you want to go. This helps you in saving energy and avoiding a lot of stress associated with navigating traffic, especially during rush hours. You will not be exhausted when you get home from work. Also, you don’t have to take out time for taking your car in for maintenance as you are hitching a ride with someone else.

Ridesharing improves air quality

Have you noticed the number of cars on the street these days? Since the introduction of ridesharing, there has been a reduction in the cars you see every day because several people are now traveling together. Passenger cars have a huge impact on the air quality due to hydrocarbon emissions, total nitrogen oxide emissions, and carbon monoxide emissions. This means that the air you breathe in becomes polluted.

Ridesharing helps in conserving fuel

Last, but definitely not the least, ridesharing is a way to conserve non-renewable resources like oil. With less vehicles being used, the amount of oil required is automatically reduced and this can help in preserving resources for future generations.

Thus, ridesharing has proven to be helpful for both people and the environment.

While the new car sales market has thrived over the course of the last two years, we have also seen a rise in the demand for used cars across the UK and Europe. Whether you simply want an affordable car or wish to invest in used vehicles that can be restored and sold for a profit, however, there is a pressing need to identify reputable and affordable spare parts that can optimise functionality. This is a challenging process, however, even if you have experience of sourcing and purchasing parts.

3 Key considerations when sourcing Spare car parts

With this in mind, here are three tips and ideas to keep in mind when sourcing spare car parts and attempting to buy them at an affordable price: –

1. Identity the best sources for spare car parts 

This is perhaps the most important point to bear in mind, as without a knowledge of where reputable spare parts can be sourced you cannot make a purchase one way or another. The AA Cars website recently ran a good feature that helps to provide a starting point, as it listed a number of the top automotive shows coming to the UK in the near future (including the popular London Motor Show in May). This offers access to a host of car brands and high quality spare parts, so it may be worth checking out it out or targeting other events for specific manufacturers.

In addition to this, you may also want to consider local wholesalers and online marketplaces such as Ebay, as these offer access to private vendors who are selling parts at a discounted rate.

2. Carry out Research and make an informed decision 

Regardless of which channel through which you purchase your spare parts, you will need to conduct thorough market research. This ensures that you are able to access the right parts for your vehicle, while it also helps you to identify the best possible outlets from which to make a purchase. Ebay is a deceptively large and impressive vendor of new and manufactured car parts, meaning that all that s left for you as a consumer is to appraise individual sellers, check delivery costs and ensure that you are ultimately buying reputable parts.

1. Verify the availability and cost of your Parts

With markets identified and dealerships or vendors approved, the next step is to verify the transaction and confirm the details of your order. By confirming that a supplier has the specific part numbers that you require in stock (and in the sufficient quantities), you can make an informed purchase decision which guarantees value for your hard-earned money. Otherwise, you run the risk of losing time or even money in the short-term, either forcing your car off the road of delaying the completion of a restoration project.